Question 1

Who is Tailor Base Patterns for?

Accepted Answer

Tailors, home sewists with pattern-drafting experience, and design students who need a fast, accurate base block instead of drafting one by hand.

Question 2

Do I need to know what a sloper/block is?

Accepted Answer

Yes. The output is an unstyled base pattern (sloper), not a finished garment pattern — you're expected to add ease, style lines, and seam allowance yourself.

Question 3

Will it move darts for me?

Accepted Answer

No. The tool generates the base dart positions from your measurements; dart manipulation (rotating to princess seams, French darts, etc.) is a technique you apply afterward.

Question 4

How important is measurement accuracy?

Accepted Answer

Critical. The pattern is only as good as the input — see our illustrated measurement guide (tailorbasepatterns.com/guide) before you start, and take measurements over close-fitting clothing with a helper if possible.

Question 5

I'm new to patternmaking — can I still use this?

Accepted Answer

You can, but expect a learning curve turning the sloper into a wearable garment. We recommend pairing it with a beginner sloper-fitting resource first.

Question 6

What's the difference between this and a sized pattern (S/M/L)?

Accepted Answer

Standard sizes assume a “typical” body. This generates a block from your measurements and posture, so fit issues come from technique, not the size chart. If you don’t have measurements yet, you can start from a standard size and switch to your own later.

Question 7

Does it adjust for posture or spine curve?

Accepted Answer

Yes. It compares your front and back waist-length measurements to detect Normal, Hunched forward, or Hunched back posture, then shifts the shoulder seam and dart angles to match — see the real comparison above, generated from three different saved measurement sets.

Question 8

Can I save measurements for multiple people, e.g. clients?

Accepted Answer

Yes. Save as many named measurement sets as you like — one per client, family member, or project — and regenerate any of their patterns instantly without re-measuring.

Question 9

Is this based on a real tailoring method, or something custom?

Accepted Answer

Yes. The drafting engine is based on Единая методика конструирования одежды СЭВ (ЕМКО СЭВ), known in English as the EMKO CMEA method — a garment pattern-drafting system developed in the USSR between 1975 and 1985 by the Central Research Institute of the Garment Industry (CNIISHPI) for standardized mass-production clothing manufacturing across the Eastern Bloc. Tailor Base Patterns uses it as the base for bodice, sleeve, and skirt block (sloper) generation, which is why precise, accurate input measurements matter so much for the result. How our pattern construction works. Most home-sewing pattern generators start from a small handful of measurements (bust, waist, hip) and scale a standard block to fit. Our drafting engine takes a more detailed path: Extended bust measurement set — instead of one bust circumference, the method uses four separate bust-level measurements, taken through the armpits, through the bust points, at bust height, and at the under-bust, so the draft accounts for bust projection and shape, not just overall girth. Automatic posture correction — before drafting begins, the method compares your front and back waist lengths and classifies your posture (upright, forward-rounded, or erect/arched), then shifts the neckline and center-back/front lines to compensate. Level-based construction geometry — the pattern is built level by level (chest, waist, hip), with the back, side, and front sections constructed in relation to each other at every level. Proportional ease distribution — fabric ease at the waist is split proportionally across the back-center seam, back side dart, side seam, and front dart. Low-bust and hip corrections — automatic corrections re-balance the armhole when the bust point sits low, and cut-and-spread the hip line when the drafted hip width doesn't match your actual hip measurement. The result is a first-draft block tailored to your actual body shape and posture, not a generic size adjusted after the fact.

Question 10

History of the method

Accepted Answer

In short: this is a real, decades-tested industrial drafting standard — not something we invented — which is why getting your measurements right matters so much for the result. The method used to construct patterns comes from the USSR era, and is called Единая методика конструирования одежды СЭВ (ЕМКО СЭВ), which translates to the "Unified Method of Clothing Design of the CMEA" (EMKO CMEA). It is historically one of the most significant, scientifically grounded, and comprehensive methods for mass-production garment pattern making. About the method: it was developed with the primary goal of unifying and standardizing industrial clothing manufacturing. Its core characteristics include a scientific approach — the draft construction is based on extensive anthropometric studies and precise mathematical calculations — and universality — it provides a single algorithm, notation system, and approach for any type of clothing. The creator: the method does not have a single individual author; it is the result of a massive collaborative scientific effort developed between 1975 and 1985 by specialists from the CMEA (Council for Mutual Economic Assistance) member countries. The development and technical management were spearheaded by the Central Research Institute of the Garment Industry (CNIISHPI) under the Ministry of Light Industry of the USSR. Professor Valentin Medvedkov (Валентин Медведков) is historically recognized as one of the chief editors and coordinators of the methodology. Distribution and usage: historically, the methodology was introduced as the mandatory standard for mass clothing production across the entire Eastern Bloc (USSR, Bulgaria, Hungary, East Germany, Poland, Romania, Czechoslovakia, etc.) — all large-scale apparel factories in these regions utilized these principles. Although the CMEA and the USSR dissolved in 1991, EMKO CMEA remains one of the fundamental methodologies taught in universities and technical colleges across Eastern Europe and CIS countries, and is still used in large-scale manufacturing due to its unmatched precision in size grading for mass-market body types. However, professional pattern makers note that for bespoke, made-to-measure tailoring, its formulas can be overly complex and time-consuming. Tailor Base Patterns uses this method as the base of the bodice, sleeve, and skirt block (sloper) generation — precise measurements are extremely important for this method to produce an accurate draft.

Ваши мерки.
Ваше лекало. За несколько секунд.

Вот что вы действительно скачаете

Лекало адаптируется к вашей фигуре

От мерок до готового лекала за несколько секунд.

От мерок до лекала за 4 шага

28 мерок — для каждой есть схема

Для повторных заказов

Подходит ли вам этот сервис?

История методики

Лекала, которые действительно подходят по фигуре

Всегда готово к печати

Начните с бесплатного лекала

Ваши мерки.Ваше лекало. За несколько секунд.